Sunbeam Alpine Owners Club

alven · Joined: 31 May 2008 Posts: 13 Location: On the border

Hi all,
Just accuired a Mint Green Series 2 Alpine. Also got a set of original new seatbelts. Does the S2 have anchor points for them?
Ta. Alven

_________________
Iv'e had my mid-life crisis!

Chris Barker · Posted: Wed Jul 02, 2008 6:05 pm Post subject:

It may have at least the floor mounts. These are at the rear corners of the seat pans. They are easy to look for as they have nuts welded underneath. You can drill all the holes as long as you fit some reinforcement - suggest ~2" square plates about 1/8" thick. Bolts are 7/16UNF. The shoulder mount is in the rear wheel arch - again with a nut which is visible by looking above the wheel, just forward of top centre. If not there, measure off another Alpine.

alven · Joined: 31 May 2008 Posts: 13 Location: On the border

Chris Barker wrote:

It may have at least the floor mounts. These are at the rear corners of the seat pans. They are easy to look for as they have nuts welded underneath. You can drill all the holes as long as you fit some reinforcement - suggest ~2" square plates about 1/8" thick. Bolts are 7/16UNF. The shoulder mount is in the rear wheel arch - again with a nut which is visible by looking above the wheel, just forward of top centre. If not there, measure off another Alpine.

Thanks for that Chris, will have a look see if this rain ever stops!

_________________
Iv'e had my mid-life crisis!